#CANON PRO9000 MARK II ERROR CODE 6A00 HOW TO#
#CANON PRO9000 MARK II ERROR CODE 6A00 INSTALL#
#CANON PRO9000 MARK II ERROR CODE 6A00 MANUAL#

When printing the nozzle check pattern or performing manual print head alignment: If the problem continues after aligning the print head again, tap Resume / Cancel to dismiss the error, and then perform a manual print head alignment.Tap Resume / Cancel to dismiss the error, then move your printer so that the Paper output slot isn't exposed directly to strong light.The Paper output slot is exposed to strong light.For Automatic print head Alignment, always load paper on the rear tray.Tap Resume / Cancel to dismiss the error, then load two sheets of A4/Letter-sized plain paper in the rear tray.Paper of size other than A4 or Letter is loaded in the rear tray.Tap Resume / Cancel to dismiss the error, and print the nozzle check pattern to check the status of the print head.When performing an Automatic Print Head Alignment: The page size setting doesn't match the size of the paper loaded in the printer. The automatic print head alignment failed. If you moved the front tray during a print, return the front tray to the correct position, then tap Resume / Cancel on the printer and try your print again.ĭon't move the front tray while the printer is in operation.

#CANON PRO9000 MARK II ERROR CODE 6A00 HOW TO#

Refer to loading paper for details about how to return the front tray to its normal printing position. Return the front tray to its normal printing position, make sure that paper is loaded in the rear tray, then tap Resume / Cancel on the printer to resume your print. The front tray isn't set to its correct position / The front tray was moved during printing. If the error persists, check if you can print another photograph. Refer to your device's manual for any necessary settings. You may also have to turn on your device or select play mode manually after you connect the device to the printer. If that happens, disconnect and reconnect the USB cable.ĭepending on the model or brand of your device, you may have to select a PictBridge compliant print mode on the device before you connect it to the printer. Make sure the device that's connected to the printer is PictBridge compliant.Ī communication time out occurs if an operation takes too long or if it takes too much time to send data. The printer hasn't received a response from the digital camera / The digital camera or digital video camcorder connected isn't compatible with this printer. Tap Resume / Cancel to continue printing. Those ink tanks will be flashing.Ĭonfirm that the ink tanks are installed in the appropriate positions. More than one ink tank of the same color are installed. Some ink tanks are not installed in the correct position. If the inner cover is open, close the inner cover and tap Resume / Cancel on the printer.Īn ink tank isn't installed in the correct position. Or if you still need help, visit our Canon Community by clicking the button below to get answers: If your product issue was not resolved after following the steps above, or if you require additional help, please create or log in to your Canon Account to see your technical support options. If the error persists, the print head may be damaged. If the print head is already installed, remove the print head and reinstall it.

#CANON PRO9000 MARK II ERROR CODE 6A00 INSTALL#

The print head isn't installed / print head is defective.įollow the directions in your setup manual to install the print head. If multiple ink lamps are flashing, refer to routine maintenance and confirm the status of each ink tank. The printer may be damaged if printing continues under the ink out condition. Replacing the ink tank is recommended after the print completes. If a print is in progress and you want to continue, tap Resume / Cancel with the ink tank installed. If the lamp on the ink tank is flashing, the ink may have run out.

If the lamp on the ink tank isn't lit, the ink tank may not be installed properly.

Remove the jammed paper, reload paper in the printer, and then tap Resume / Cancel.Īn ink tank isn't installed properly / The ink may have run out If the error still remains when the front tray or the front feed support is opened, the paper may be jammed. If the front feed support is closed, open it and tap Resume / Cancel on the printer. The front tray or front feed support is closed / Paper jams. Reload the paper in the rear tray and tap Resume / Cancel. Refer to Loading paper for details about how to load the paper correctly in the front tray. Load the paper correctly in the front trayĪnd tap Resume / Cancel. If the alarm lamp Is lit orange, the printer isn't ready to feed paper from the front tray yet. The number of flashes indicates the type of error that has occurred.Ĭount the flashes and take the appropriate action to correct the error. When a printer error occurs, the alarm lamp flashes orange as shown below.

Canon pro9000 mark ii error code 6a00